Polyaluminium chloride wide scope of application: used in drinking water, industrial water, water, sewage and industrial wastewater treatment, polyaluminium chloride iron and all kinds of industrial water for domestic and drinking water purification treatment has obvious effect.

    Due to the different nature of the raw water, should according to different conditions, the scene debugging or a beaker experiment, optimal conditions of use and the best o-phenylenediamine in order to achieve the best treatment effect.

1, before using, will this product in a certain concentration (10-30%) in dissolved vanadium pool, injected water mixing fully hydrolysis, quiet place to show red brown liquid, then the water diluted to the required concentration of coagulation dosing. Water can be directly dosing as 2-5%, industrial wastewater treatment directly into a 5-10% additive.

2, the determination of additive amount, according to the nature of the raw water can be through the production debugging or beaker experiment where the alum flowers form a moderate amount of water can the original with other medicine dose for reference, our products in the same conditions and solid polyaluminium chloride dosage is roughly, is the 1/3 of solid dosage of aluminum sulfate - 1/4. If you are on the original liquid products, can according to the corresponding reagent concentration calculation for discretion. Roughly than 1:3 by weight.

3, when used, the mixed solution of the above pump into the tank, through measuring coagulation dosing solution with raw water.

4, usually on the day of preparation on the day of use, dispensing need water, slightly deposits belong to normal phenomenon

5, according to the original production with: solid: water = 1/5, mix dissolves first, then add water dilute solutions to the content of 2 ~ 3%.

6, production with press: solid: water = 1/5, mix dissolves first, then add water dilute solutions to the content of 2 ~ 3%.