Polyaluminium chloride are easily soluble in water and can be used for drinking water, industrial water service and industrial effluent and domestic sewage treatment. Coagulation effect except show the residual turbidity chromaticity reduce and flocs formed piece, high adsorption performance, sludge filtration dehydration performance is good wait for a characteristic, especially in the treatment of high turbidity water, low temperature and low turbidity water, the treatment effects than alum, polyaluminium chloride and polymeric ferric sulfate, three iron oxide, the effect is good. For the low temperature and low turbidity water purification treatment effect is particularly evident, don't add alkaline additives and other coagulants incomparable effect.

1, the dosage is far lower than the traditional flocculant, after purification, the water quality good.

2, the flocculation body forming fast, precipitation is rapid, is bigger than traditional products processing capacity.

3, the alkalinity of the water consumption, less water lower PH.

4, low product solution insolubles, good pervious to light.

5, the applicable PH range, within the scope of 5.0 to 9.0 all can use.

6, the turbidity, alkalinity, organic matter content changes adaptability is strong.

7, product quality indicators, especially heavy metal indicator can satisfy the requirements of GB15892-2003 standard.

8, low residual free aluminum amount, after purification water quality meet the national standards requirements.

9, corrosive small, powder easily dissolved, superior to other similar products.